English             
HOME CDM Manufactory Ti products Equipment Technical Information Application Contact CDM
· Titamnium tube and pipe
· Titanium fastener
· Titanium and steel clad plate
· Titanium plate and sheet
· Titanium bar and rod
· Titanium wire/foil and strip
· Titanium clad copper tube/rod and wire
· Titanium casting
· Titanium raw material
 
CDM Titanium Fastener catalogue
CDM Titanium material catalog
AMS 4928R titanium bar test by Dirats
　
NICKEL & ALLOYS | CHEMICAL ANALYSIS | BASIC TENSION DATA
High-Performance Alloys
The time-tested nickel alloys and cobalt alloys of CDM Titanium of Metal & Alloy Manufactory are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications
INCONEL alloys
INCONEL alloy 600
A nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion.
UNS: N06600
 
Limiting Chemical Composition, %
ni+Co
cr
fe
c
mn
s
si
cu
72.0 min.
14.0-17.0
6.00-10.00
      0.15 Max.
1.00 Max.
0.015 max.
0.50 max.
0.50 max.
 
Available products and specifications
Rod, Bar and Wire - ASTM B 166/ASME SB 166
Plate and Strip - ASTM B 168/ASME SB 168
Pipe and Tube - ASTM B 167/ASME SB 167, ASTM B 163/ASME SB 163
INCONEL alloy 601
A nickel-chromium alloy with an addition of aluminum for outstanding resistance to oxidation and othe
r forms of high-temperature corrosion. It also has high mechanical properties at elevated temperatures.
UNS: N06601
 
Limiting Chemical Composition, %
ni
cr
fe
al
c
mn
s
si
cu
58.0-63.0
21.0-25.0
remainder
1.0-1.7
0.10 Max.
1.0 Max.
0.015 max.
0.50 max.
1.0 max.

Available Products and Specifications
Rod, Bar and Wire - ASTM B 166/ASME SB 166
Plate and Strip - ASTM B 168/ ASME SB 168
Pipe and Tube - ASTM B 167/ASME SB 167

INCONEL alloy 625
A nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion.
UNS: N06625
Limiting Chemical Composition, %
ni
cr
fe
mo
Nb(plus ta)
c
mn
si
p
s
al
ti
Cobalt
58.0 min.
20.0-23.0
5.0 max.
8.0-10.0
3.15-4.15
0.10 Max.
0.50 Max.
0.50 max.
0.015 max.
0.015 max.
0.40 max.
0.40 max.
1.0 max.

Available Products and Specifications
Rod and Bar - ASTM B 446/ASME SB 446
Plate and Strip- ASTM B 443/ASTM SB 443
Pipe and Tube - ASTM B 444/B 829 & ASME SB 444/SB 829
INCONEL alloy 718
A precipitation-hardenable nickel-chromium alloy also containing significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium. It combines corrosion resistance and high strength with outstanding weldability including resistance to postweld cracking. The alloy has excellent creep-rupture strength at temperatures to 1300°F (700°C).
UNS: N07718

Limiting Chemical Composition, %
ni+Co
cr
fe
nb(plus ta)
mo
ti
al
cobalt
c
mn
si
p
s
b
cu
50.00-55.00
17.0-21.0
balance*
4.75-5.50
2.80-3.30
0.65-1.15
0.20-0.80
1.00 Max.
0.08 max.
0.35 max.
0.35 max.
0.015 max.
0.015 max.
0.006 max.
0.30 max.

Available Products and Specifications
Rod and Bar - ASTM B 637/ASME SB 637
Plate and Strip - ASTM B 670, ASTM B 906,ASME SB 670, ASME SB 906
INCOLOY alloys

INCOLOY alloy 800
A nickel-chromium alloy with good strength and excellent resistance to oxidation and carburization in high-temperature atmospheres. It also resists corrosion by many aqueous environments. The alloy maintains a stable, austenitic structure during prolonged exposure to high temperatures.
UNS: N08800

Limiting Chemical Composition, %
ni
cr
fe
al
c
mn
s
si
cu
ti
30.0-35.0
19.0-23.0
39.5 min.
0.15-0.60
0.10 Max.
1.50 Max.
0.015 max.
1.0 max.
0.75 max.
0.15-0.60 max.

Available Products and Specifications
Rod, Bar, Wire and Forgings - ASTM B 408 & ASME SB 408 , ASTM B 564 &ASME SB 5645
Plate and Strip - ASTM A240/A 480 & ASME SA 240/SA 480, ASTM B 409/B 906 & ASME SB 409/SB 906
Pipe and Tubes - ASTM B 163 &ASME SB 163, ASTM B 407/B829 & ASME SB 407/SB 829

INCOLOY Alloys 800H & 800HT
Nickel-iron-chromium alloys having the same basic composition as INCOLOY alloy 800 but with significantly higher creep-rupture strength. The higher strength results from close control of the carbon, aluminum, and titanium contents in conjunction with a high-temperature anneal.
UNS: N08810, N08811

Limiting Chemical Compositions, %, for INCOLOY alloys 800H
ni
cr
fe
al
c
al+Ti
ti
30.0-35.0
19.0-23.0
39.5 min.
0.15-0.60
0.05-0.10
0.30-1.20
0.15-0.60

Limiting Chemical Compositions, %, for INCOLOY alloys 800HT
ni
cr
fe
al
c
al+Ti
ti
30.0-35.0
19.0-23.0
39.5 min.
0.25-0.60
0.06-0.10
0.85-1.20
0.25-0.60

Available Products and Specifications
Rod, Bar, Wire and Forgings - ASTM B408 & ASME SB 408, ASTM B 564 &ASME SB 564
Plate and Strip - ASTM A 240/A 480 & ASME SA 240/SA 480, ASTM B 409/B906 & ASME SB 409/SB 906
Pipe and Tubes - ASTM B 163 & ASME SB 163, ASTM B407/B 829 & ASME SB 407/SB 829
MONEL alloys

MONEL alloy 400
A nickel-copper alloy with high strength and excellent corrosion resistance in a range of media including sea water, hydrofluoric acid, sulfuric acid, and alkalies.
UNS: N04400

Limiting Chemical Composition, %
ni
c
mn
fe
s
si
cu
63.0 min.
0.3 max.
2.0 max.
2.5 max.
0.024 max.
0.5 Max.
28.0-34.0

Available Products and Specifications
Bar, Rod, Wire, and Forgings - ASTM B 164& ASME SB 164/ ASTM B 564& ASME SB 564
Plate and Strip -ASTM B 127, ASME SB 127
Pipe and Tube - ASTM B 163& ASME SB 163/ ASTM B 165& ASME SB 165

MONEL alloy K-500
A precipitation-hardenable nickel-copper alloy that combines the corrosion resistance of MONEL alloy 400 with greater strength and hardness. It also has low permeability and is nonmagnetic to temperatures as low as -150°F (-101°C). Used for pump shafts, oil-well tools and instruments, doctor blades and scrapers, springs, valve trim, fasteners, and marine propeller shafts.
UNS: N05500 Li
 
Limiting Chemical Composition, %
ni
cr
fe
s
si
mn
cu
ti
63.0 min.
0.25 max.
2.0 max.
0.01 max.
0.5 Max.
1.5 max.
27.0-33.0
0.35-0.85

Available Products and Specifications
Rod and Bar- ASTM B 865
Nickel

Nickel 200
Commercially pure (99.6%) wrought nickel with good mechanical properties and resistance to a range of corrosive media. Good thermal, electrical and magnetostrictive properties.
UNS: N02200

Limiting Chemical Composition, %
ni+Co
cu
fe
mn
c
si
s
99.0 min.
0.25 max.
0.40 max.
0.35 max.
0.15 Max.
0.35 Max.
0.01 max.

Available Products and Specifications
Rod and Bar- ASTM B 160/ ASME SB 160
Plate and Strip - ASTM B 162/ ASME SB 162
Fittings- ASTM B 366/ ASME SB 366
Pipe and Tube- ASTM B 161&ASME SB161/ ASTM B 163&ASME SB163

Nickel 201
Commercially pure (99.6%) wrought nickel essentially the same as Nickel 200 but with a lower carbon content to prevent embrittlement by intergranular carbon at temperatures over 600°F (315°C). Lower carbon content also reduces hardness, making Nickel 201 particularly suitable for cold-formed items.
UNS: N02201
 
Limiting Chemical Composition, %
ni+Co
cu
fe
mn
c
si
s
99.0 min.
0.25 max.
0.40 max.
0.34 max.
0.15 Max.
0.35 Max.
0.01 max.

Available Products and Specifications
Rod and Bar- ASTM B 160/ ASME SB 160
Plate and Strip - ASTM B 162/ ASME SB 162
Fittings- ASTM B 366/ ASME SB 366
Pipe and Tube- ASTM B 161&ASME SB161/ ASTM B 163&ASME SB163

　
Copyright © 2009 . cdmti.com All Rights Reserved. CDM Titanium Of Metal & Alloy Manufactory.